ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Timing Belt
Installation
1. Install the timing belt in the reverse order of removal;
Only key points are described here.
2. Position the crankshaft and the cam pulleys as shown before installing the timing belt.
A Set the crankshaft so that the No. 1 piston is at top-dead-center (TDC).
NOTE: Align the groove on the teeth side of the timing belt drive pulley to the b pointer on the oil pump.
B D1 5137, D1 5138 engine: Align the TDC marks on the cam pulley with the cylinder head upper surface.
D1 6Z6 engine: Align the TDC mark on the cam pulley with pointer on the back cover.
D1 5Z1 engine: Align the TDC marks on the cam pulley with pointers (triangle marks) on the back cover.
3. Install the timing belt tightly in the sequence shown.
T Timing belt drive pulley (crankshaft) - ® Adjusting pulley ®s Water pump pulley ®.