ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Removal
CAUTION: Inspect the water pump when replacing the timing belt (page 10-9).
NOTE:
• Turn the crankshaft so that No. 1 piston is at topdead-center (page 6-57 and 58).
• Before removing the timing belt, mark its direction of rotation if it to be reused.
1. Remove the splash shield.
2. Remove the power steering pump.
• Do not disconnect the P/S hoses.
3. Remove the A/C compressor adjust pulley with bracket and the belt (with A/C), then remove the alternator belt.
4. Remove the P/S bracket.
5. Loosen the alternator adjusting bolt and pivot nut, then remove the belt.
6. Remove the cruise control actuator and the P/S tank bracket.
7. Remove the engine support nuts. Loosen the mount bolt and pivot the engine side mount rubber out of the way.