ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Clutch Inspection
• Check the rotor pulley bearing play and drag by rotating the rotor pulley by hand. Replace the rotor pulley with a new one if it is noisy or has excessive play/drag.
• Release the compressor clutch connector from the connector holder. Check the field coil for resistance:
Field Coil resistance: 2.8 ± 0.15 ohm at 20°C (68°F)
If resistance is not within specifications, replace the field coil.
CLEARANCE: 0.35-0.65 mm (0.014-0.026 in)
NOTE: The shims are available in four sizes: 0.1 mm, 0.2 mm, 0.4 mm and 0.5 mm of thickness.