Modulator/Pump

Index/Torque

AWARNING Before removing the modulator-to-pump high-pressure line, be sure to relieve the pressure fluid from the maintenance bleeder (page 19-81).

CAUTION:
•   Do not spill brake fluid on the car; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
•   To prevent spills, cover the hose joints with rags or shop towels.
•   Before reassembling, check that all parts are free of dust and other foreign particles.
•   Do not mix different brands of brake fluid as they may not be compatible.
•   Do not reuse the drained fluid. Use only clean DOT 3 or 4 brake fluid.
•   Do not disassemble the modulator. Replace the modulator as an assembly if it is defective.
•   Do not disassemble the pump and pressure switch. Replace the pump and pressure switch as an assembly if they are defective.