Rear Damper

Removal

1. Jack up the rear of car and support on safety stands in proper locations.
2. Remove the damper upper cover at the rear seat lining.
3. Remove the two nuts.


4. Remove the speed sensor wire bracket. NOTE: Do not disconnect the speed sensor.
5. Remove the damper mounting bolt. 6. Remove the self-locking bolt.

CAUTION: Replace the self-locking bolts if you can easily thread a non-self-locking nut past their nylon locking inserts.
que to turn the nut on the bolt).

7. Lower the rear suspension and remove the damper assembly.