Steering Gearbox

Valve Body Unit Overhaul

NOTE: If the Valve Body is damaged, it must be replaced as a set, with the Cut-off Valve and 4-Way Control Valve (shaded parts).
CAUTION:
•   Replace the 0-rings and seals with new ones.
•   Do not dip the O-rings and seals in solvent.
•   Apply grease in the seal grooves to keep the cap and port seals in place.
•   Apply grease to the 50 x 2.4 mm and 11 mm O-rings to keep them in place in the valve ports.
STEERING GREASE    Part Number 08733-BO70E