Maintenance
Pump Belt Adjustment
1. Apply a force of 100 N (10 kg, 22 Ib) and measure the deflection between the P/S pump and the crankshaft pulleys.
Deflection:
Used Belt: 8.0-12.0 mm (0.31-0.47 in) New belt: 6.0-9.5 mm (0.24-0.37 in)
NOTE: If there are cracks or any damage evident on the belt, replace it with a new one.
Measure with Belt Tension Gauge:
Attach the belt tension gauge to the belt and measure the tension of the belt.
Tension:
Used Belt: 350-500 N (35-50 kg, 77-110 Ib) New Belt: 500-700 N (50-70 kg, 110-154lb)
NOTE:
• If there are cracks or any damage evident on the belt, replace it with a new one.
• See the instructions for the tension gauge.
2. Loosen the P/S pump mounting bolts.
3. Turn the adjusting bolt to get the proper belt tension, then retighten the bolts.
4. Start the engine and turn the steering wheel from lock-to-lock several times, then stop the engine and recheck the deflection of the belt.