ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Mainshaft
Disassembly/Inspection/Reassembly
NOTE: • Lubricate all parts with ATF during reassembly. • Install thrust needle bearings with unrolled edge of bearing retainer facing washer. • Inspect thrust needle and needle bearings for galling and rough movement. • Before installing the 0-rings, wrap the shaft splines with tape to prevent damaging the 0-rings. • Locknut has left-hand threads.