1 st-hold Accumulator/R. Side Cover

Disassembly/Inspection/eassembly

NOTE:
•   Clean all parts thoroughly in solvent or carburetor cleaner and dry with compressed air.
•   Blow out all passages.
•   Coat all parts with ATF before reassembly.

SPRING SPECIFICATIONS
Unit of length: mm (in)

No.	Spring	Standard (New)
		Wire Dia.	O. D.	Free Length	No. of Coils
1	1st-hold accumulator spring	4.0 (0.157)	21.5 (0.846)	71.7 (2.823)	8.3