Governor Body

Disassembly/Inspection/Reassembly

NOTE:
•   Clean all parts thoroughly in solvent or carburetor cleaner and dry with compressed air.
•   Blow out all passages.
•   Check that the governor works smoothly; replace it if it does not.
•   Coat all parts with ATF before reassembly.

SPRING SPECIFICATIONS
Unit of length: mm (in)

No.	Spring	Standard (New)
		Wire Dia.			0. D.		Free Length		No. of Coils
1	Governor spring A	1.0 (0.039)			18.8 (0.740)		32.9 (1.295)		4.1
2	Governor spring B	0.9 (0.035)			11.8 (0.465)		27.8 (1.094)		6.0
		0.9 (0.035)			11.8 (0.465)		29.1 (1.146)		6.0