ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Secondary Valve Body
Disassembly/Inspecton/Reassembly
NOTE: • Clean all parts thoroughly in solvent or carburetor cleaner and dry with compressed air. • Blow out all passages. • Replace valve body as an assembly if any parts are worn or damaged. • Check all valves for free movement. If any fail to slide freely, see Valve Body Repair on page 14-73. • Coat all parts with ATF before reassembly. CAUTION: Do not use a magnet to remove the check balls; it may magnetize the balls.