Transmission

Removal

A WARNING
• Make sure lifts, jacks and safety stands are placed properly, and hoist brackets are attached to the correct position on the engine (see pages 1-10 thru 1-12).
• Apply parking brake and block rear wheels, so car will not roll off stands and fall on you while working under it.

CAUTION: Use fender covers to avoid damaging painted surfaces.
1. Disconnect the battery negative (-) and positive (+) cables from the battery.
2. Remove the resonator, air intake hose and air cleaner case.

3. Remove the starter motor cable and cable holder from the starter motor.

4. Remove the transmission ground cable from the transmission.

5. Disconnect the lock-up control solenoid valve connector.