ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Throttle Control Cable
Inspection
NOTE: Before inspecting the throttle control cable, make sure;
• Throttle cable free play is correct (see page 11-123).
• Idle speed is correct (see page 11-102).
• To warm up the engine to normal operating temperature (cooling fan comes on).
1. Verify that the throttle control lever is synchronized with the throttle linkage while depressing and releasing the accelerator pedal.
2. If the throttle control lever is not synchronized with the throttle linkage, adjust the throttle control cable.
3. Check that there is play in the throttle control lever while depressing the accelerator pedal to the fullthrottle position.
4. Remove the cable end of the throttle control cable from the throttle control lever.
5. Check that the throttle control lever moves smoothly.