ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Reassembly
NOTE:
• Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
• Blow out all passages.
• Lubricate all parts with ATF before reassembly.
1. Inspect for a loose check valve.
2. Install a new O-ring on the clutch piston.
3. Be sure that the disc spring is securely staked. NOTE: For 1st, 3rd and 4th clutches.
4. Install the piston in the clutch drum. Apply pressure and rotate to ensure proper seating.
NOTE: Lubricate the piston 0-ring with ATF before installing.
CAUTION: Do not pinch O-ring by installing the piston with force.
5. Install the return spring and spring retainer and position the circlip on the retainer.