Transmission

Reassembly

1. Install the magnet and reverse lock cam.

2. Set shift arm A on the clutch housing, then install the shift rod.

3. Install the spring washer and shift arm A attaching bolt.

4. Install the steel ball, spring and set ball spring bolt.

5. Install shift arm B in the interlock, then set it on the clutch housing.
6. Insert shift arm shaft B in the clutch housing

7. Install the spring collar, spring, and steel ball into the case. Compress the ball and insert the shift arm shaft.

8. Install shift arm C in shift arm A, then insert the shift arm shaft.

9. Install the reverse select retainer and reverse select spring onto shift arm shaft.

10. Install the differential assembly.