Clutch Disc

Removal/Inspection

1. Remove the clutch disc and special tools.

2. Inspect lining of the clutch disc for signs of slipping or oil. Replace it, if it is burned black or oil soaked.

3. Measure the clutch disc thickness.
Clutch Disc Thickness:
Standard (New): 8.1-8.8 mm (0.32-0.35 in) Service Limit:   5.7 mm (0.22 in)

4. Measure the depth from the lining surface to the rivets, on both sides.
Rivet Depth:
Standard (New): 1.3 mm (0.051 in) Service Limit:   0.2 mm (0.008 in)