Hood/Opener and Latch

Replacement/Adjustment

NOTE: An assistant is helpful when removing the hood.

ALIGNMENT:
•   The hinges can be adjusted right and left as well as fore and aft by using the elongated holes.
•   Turn the edge cushions as necessary, to make the hood fit flush with the body at front and side edges.
•   Adjust the hood latch to obtain the proper height at the forward edge.
NOTE:
•   Before pulling out the opener cable, tie a string to the cable so you can pull it back in later.
•   Take care not to bend the opener cable.
Installation is the reverse of the removal procedure.
NOTE:
•   Make sure the opener cable is routed and connected properly.
•   Adjust the hood alignment.