Child Seat Anchor Plate


Attachment points are provided for a rear seat mounted child restraint system which uses a top tether.
The tether attachment points are located on the rear shelf, just behind the rear seat back. When using a child seat with a top tether, remove the plug cover from the attachment points and install the child seat anchor plate securely.

NOTE:
•   Do not remove the toothed washer from the child seat anchor plate. Use the child seat anchor plate with the toothed washer attached to it.
•   When installing a child seat on the rear seat, follow the instructions of the manufacturer of the child seat.
•   Additional anchor plates are available.
A WARNING
•   Do not use the anchor plate for any other purpose, because it is designed exclusively for installation of a child seat.
•   Make sure the rear seat back is locked firmly when installing a child seat.
Принимаем:
Мы в социальных сетях:
Напишите нам:
Наши телефоны:
Наши реквизиты:
ООО "ПартсРу"
ИНН 7713747944, КПП 774301001
ОГРН 1127746372401

Политика конфиденциальности
2024, HondaWorld.
Все права защищены
Карта сайта