Motor, Drain Tube and Frame Replacement
CAUTION: Be careful not to damage the seats, dashboard and other interior trim.
1 . Remove the sliding glass (page 20-50) and the headliner (page 20-57).
2. Disconnect the motor and relay wire harness; remove the clips securing the ceiling light wire harness.
NOTE: When removing the sunroof motor, remove the 2 mounting bolts and 3 nuts.
3. Disconnect the drain tubes.
5. To install, insert the frame's rear hooks into the body holes, then install parts in the reverse order of the removal procedure.
NOTE:
• Install the tube clips with the ends facing side to ease installation of the headliner.
• Clean the surface of moonroof frame.
• Check the drain seal assembly.
• Check for water and air leaks.