Moonroof

Glass Bracket/Sunshade Replacement


8. Slide the sunshade forward, then remove it.

9. Install the sunshade in the reverse order of the removal procedure. Make sure it moves smoothly.

Drain Channel Rod/Guide Plate Replacement


1. Remove the glass bracket (page 20-51).

2. Pry the E-clips off and remove the shafts, then separate the glass bracket and drain channel rod.

3. Pry the E-clip off and remove the guide plate from the tilt-up link A.

4. Assemble the guide plate and drain channel rod in the reverse order of the removal procedure.
NOTE: Apply grease to the moving surface.
Принимаем:
Мы в социальных сетях:
Напишите нам:
Наши телефоны:
Наши реквизиты:
ООО "ПартсРу"
ИНН 7713747944, КПП 774301001
ОГРН 1127746372401

Политика конфиденциальности
2024, HondaWorld.
Все права защищены
Карта сайта