Closing Drag Check (Motor Removed)

CAUTION: When using the spring scale, protect the leading edge of the moonroof with a shop towel.
If load is over 98 N (10 kg, 22 Ib), check side clearance and glass height adjustment (page 20-42).

Closing Force Check (Motor Installed)

CAUTION: When using the spring scale, protect the leading edge of the moonroof with a shop towel.
Closing Force: 196-245 N
(20-30 kg, 44-55 Ib)

2. If force is not within specification, install a new lock washer, adjust the tension by turning the moonroof motor clutch adjusting nut, and bend the lock washer against the adjusting nut.