Glass Bracket/Slider, Lifter and Guide Rails Replacement

1. Remove the moonroof frame (page 20-44),
2. Remove the drain channel.

NOTE: Take care not to damage, twist or lift the seal.

3. Remove the screws and sunshade rail by sliding it backward.

4. Remove the moonroof motor.
5. Remove the front drain channel.
6. Remove the nut, then remove the front rail holder.
7. Remove the guide rail mounting screws ®, then lift the guide rail. 8. Remove the nut, then remove the rear rail holder.
NOTE: Remove the anchor spring.

9. Slide the glass bracket/lifter backward, then remove it.