Moonroof

Motor, Drain Tube and Frame Replacement

CAUTION: Be careful not to damage the seats, dashboard and other interior trim.

1. Remove the glass and headliner (page 20-57).
2. Disconnect the motor and limit switch wire harness; remove the clips securing the ceiling light wire harness.

NOTE: When removing the moonroof motor, remove the 3 screws.

3. Disconnect the drain tubes.
4. Loosen the front mounting bolts.
5. Remove the 6 mounting bolts, then remove the frame from the car.

NOTE:
•   Take care not to bend the sunshade rails.

NOTE:
•   Install the tube clips with the ends facing the side to ease installation of the headliner.
•   Clean the surface of moonroof frame.
•   Check the drain seal assembly.
•   Check for water and air leaks.
•   Check for smooth movement of the sunshade.