Doors

Glass Adjustment

NOTE:
•   Place the vehicle on a firm, level surface when adjusting the doors or glass.
•   Check the weatherstrip and glass run channel for damage or deterioration and replace if necessary.

1. Remove the door panel and peel off the plastic cover (pages 20-4, 5, 13, 14).
2. Remove the power window switch from the door panel (Power window model).

3. Connect the power window switch connector to the door harness (Power window model). Install the regulator handle on the door regulator (Manual window model).
4. To adjust glass fit in the door, raise the glass as far up as possible and hold it against the door sash. Then tighten the roller guide bolts (4D front/3D) and glass mounting bolts (4D rear). Check for smooth movement of the door glass.