Rear Door

Plastic Cover Replacement


5. Remove the grommets and bracket, then carefully remove the plastic cover.

6. Install the door panel and plastic cover in the reverse order of removal.

NOTE:
•   Make sure the wire harnesses and connectors are fastened correctly on the door.
   : Harness clip locations

• Apply adhesive along the edge where necessary to maintain a continuous seal and prevent air/water leaks.

• Before tightening the door panel mounting screws, make sure the wire harnesses are not pinched.
Принимаем:
Мы в социальных сетях:
Напишите нам:
Наши телефоны:
Наши реквизиты:
ООО "ПартсРу"
ИНН 7713747944, КПП 774301001
ОГРН 1127746372401

Политика конфиденциальности
2024, HondaWorld.
Все права защищены
Карта сайта