A/T Gear Position Switch Test/Adjustment

Test:

1. Remove the front console, then disconnect the 14-P connector from the A/T gear position switch.

2. Check for continuity between the terminals in each position according to the table.

Adjustment:

1. Shift to the t position, and loosen the nuts.

2. Slide the switch in the direction of 0 position [within 2.0 mm (0.079 in.)] so that there is continuity between the "A" and "L" terminals in the range of free play of the shift lever.

3. Recheck for continuity between each of the terminals.

NOTE: