CAUTION: Check the front seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
Front seat belt removal:
1. Remove the following parts, and slide the front seat forward fully.
2. Remove all the anchor bolts, the retractor bolt and the retractor mounting bolt, then remove the front seat belt. NOTE: When removing the anchor bolts and the retractor bolt, use a 17 mm socket or box-end wrench.
3. Remove the center pillar upper trim (see page 20-56), then remove the shoulder anchor adjuster. 4. Check that the retractor locking mechanism functions as described on page 20-74.
5. Installation is the reverse of the removal procedure.
NOTE: