ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Wheel Cylinder
Disassembly and Inspection
CAUTION:
Use only clean DOT3 or DOT4 brake fluid.
Use only new replacement parts.
Brake fluid will damage the painted, plastic and rubber parts. Whenever handling fluid, protect the painted, plastic or rubber parts by covering with a rag. If fluid does get on these parts, wipe it off with a clean cloth.
Blow all passages with compressed air before reassembling.
Clean all parts thoroughly with the clean brake fluid.
Do not allow dirt or other foreign matter to contaminate the brake fluid.
Lubricate all parts with clean brake fluid during reassembly.