Pistons and Crankshaft

Removal

1. Remove the oil pan assembly. 2. Remove the right side cover.

3. Remove the oil screen.
4. Remove the oil pump.

5. Remove the bolts and the bearing cap.
CAUTION: To prevent warpage, unscrew the bolts in sequence 1 /3 turn at a time; repeat the sequence until all bolts are loosened.

MAIN BEARING CAP BOLTS LOOSENING SEQUENCE

6. Remove the rod caps/bearings and main caps/bearings. Keep all caps/bearings in order.
7. Lift the crankshaft out of the engine, being careful not to damage journals.