Ignition System

Distributor Top End Inspection

1. Check for rough or pitted rotor and cap terminals.
2. Scrape or file off the carbon deposits.
Smooth the rotor terminal with an oil stone or #600 sandpaper if rough.
3. Check the distributor cap for cracks, wear and damage. If necessary, clean or replace it.

Distributor Removal

1. Disconnect the 2-P and 8-P connectors from the distributor.

2. Disconnect the plug wires from the distributor cap.

3. Remove the distributor mounting bolts, therremove the distributor from the cylinder head.