Cruise Control

Slip Ring Test (Without SRS)

1. Remove the steering wheel.
2. Remove the column covers, then disconnect the 5-P connector from the main wire harness.
3. There should be continuity between the C and F terminal, the B and E terminal, and the A and D terminal, as you turn the slip ring.

4. If there is no continuity replace the slip ring.

Slip Ring Replacement (Without SRS)

1. Remove the steering wheel.

2. Remove the column covers, then disconnect the 5-P connector from the main wire harness.

3. Remove the 4 screws and the slip ring.