Taillights (Sedan)

Replacement

Outer Taillight:
1. Open the trunk lid, then remove the access panel.

2. Dissconnect the 4-P connector from the outer taillight.

3. Remove the 4 mounting nuts, then pull out the outer taillight.

NOTE:
•   Inspect the gasket. Replace it if it is distorted or stays compressed.
•   After installation, run water over the lights to make sure they don't leak.
Inner Taillight:
1. Open the trunk lid, then disconnect the 5-P connector from the inner taillight.
2. Remove the 3 mounting nuts, then pull out the taillight.