Taillights (Hatchback)

Replacement

Outer Taillight:
1. Open the rear hatch and tailgate, then remove the side lining (see Section 20).

2. Disconnect the 4-P connector from the outer taillight.
3. Remove the 4 mounting nuts, then pull out the outer taillight.

NOTE:
•   Inspect the gasket. Replace it if it is distorted or stays compressed.
•   After installation, run water over the lights to make sure they don't leak:

Inner Taillight:
1. Open the rear hatch, then remove the access panel.
2. Disconnect the 4-P connector from the inner taillight.
3. Remove the 3 mounting nuts, then pull out the inner taillight.