Headlight Replacement

1 . Remove the front turn signal/parking lights.

FRONT TURN SIGNAUPARKING LIGHTS
2. Remove the front bumper (see Section 20).
3. Remove the mounting bolt and nuts, then pull out the headlight and disconnect the connector from it.

Bulb Replacement

CAUTION:
•   Halogen headlights can become very hot in use; do not touch them or the attaching hardware immediately after they have been turned off.
•   Do not try to replace or clean the headlights with the lights on.
1. Disconnect the 3-P connector from the bulb, then remove the retaining spring.