ВНИМАНИЕ! График работы на майских праздниках: Офис в Москве: 9 мая ВЫХОДНОЙ!
Офис в СПБ: 1 мая, 9 мая - ВЫХОДНОЙ!
Reassembly
CAUTION: When installing the 3rd/4th and 5th synchro hubs, support the shaft on the steel blocks and install synchro hubs using a press.
1. Support 2nd gear on steel blocks as shown, then install the 3rd/4th synchro hub using a press. NOTE: After installation, inspect the operation of the 3rd/4th synchro hub set.
2. Install the 5th synchro hub using a press as shown.
3. Install the ball bearing using a press as shown.